Filling The Fresh Water Tank; Beginning Work With The Machine - diversey Taski swingo 2100µicro Traducción De Las Instrucciones Originales De Uso

Filling the fresh water tank

Caution:
Max. permissible water temperature 60 °C/140 °F.
- Diversey recommends using cold water, as hot water
will adjust to the ground temperature as soon as it
comes into contact with the ground. Thus there are no
advantages to using hot water.
• The machine must be switched off.
• Open the tank lid.
• Take the dosing cup from the fresh water tank.
• Pull the filling hose with watercou-
pling out of the fresh water tank and
connect it to a water tap.
• Fill the fresh water tank with water.
Fill fresh water tank with Aquastop filter (optional)
• Connect a water hose to the Aquas-
top filter.
• Fill the fresh water tank with water.
Dosing:
Warning:
Wear gloves, goggles and appropriate (protective)
working clothes when handling chemical products!
Danger:
Use chemical products recommended by Diversey
only and always observe the product information.
Using unsuitable products (e.g. products containing
chlorine, acids or solvents) may cause harm to health
and severe damage to the machine.
10
Dosing examples:
Information on the package of
the product
0.5% 50ml for 10l of
water
1% 100 ml for 10l
of water
2% 200 ml for 10l
of water
3% 300 ml for 10l
of water
• Fill the dosing cup with a suitable product and pour the con-
tent into the fresh water tank. Repeat the procedure until the required dosing is reached.
• When dosing is finished, the dosing cup will remain in the
tank.
Notice:
TASKI offers an automatic dosage feature as an op-
tion. It is possible to mount it additionally.
- Please contact your customer service.
Pre-cleaning
Warning:
Remove any objects (wooden, metal parts etc.)
from the cleaning surface.
The objects could be catapulted by the rotating tool, and
thereby cause injuries to people and damage to the en-
vironment.

Beginning work with the machine

Caution:
Always wear slip-resistant shoes and appropriate
working clothes when working with this machine!
Caution:
To ensure safe operation, always keep both hands
on the steering wheel/driving handle while operat-
ing the machine.
Caution:
When driving the machine for the first time, test it
out in an empty space to get familiar with the ma-
chine.
Warning:
Before beginning work (in the work position), check
whether your field of vision is sufficient to ensure
safe working. EN 3411 must be adhered to.
An insufficient field of vision can make work difficult and
therefore impair safety for the operator, machine, and
third parties.
Warning:
While working, pay attention to the maximum clear-
ance height for doors and underpasses shown on
the warning sign on the machine.
Tank capacity Product vol-
ume per tank
filling
75l 0.4l
75l 0.75l
75l 1.5l
75l 2.2l