Mizuhosi 5803 Manual De Propietario página 12

NOTE: In the event a large traction arc 5855-13 is placed on the base, the tilt function
has been made inoperable. However in the event a small traction arc 5848-191 is
placed on the base, the tilt function is still operable.
Battery Status Light:
 Green = OK
 Red = Needs Recharge
Fault Indicator Light:
 Electrical Fault
To unplug and re-attach the Hand Control:
At the end of the hand pendant coiled-cord is a black connector plug. Unscrew the
connector locking nut and pull the connector straight down out of the socket. To re-
attach, insert the connector into the socket with the notches on the connector lining up
with the slots on the socket. The connector locking nut must be tightened around the
socket to insure proper connection.
If the hand pendant is removed when table power is on, power must be switched off for
10 seconds and then back on after re-attaching the hand pendant for the hand pendant
to function (refer to section 8.0 for additional information).
MIZUHOSI 2009
12
NW0498 Rev E