Valex Flow 1300 Instrucciones De Uso página 7

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

MAINTENANCE
IMPORTANT! before any control and maintenance,
always disconnect the machine from the power supply by
unplugging it.
- Routinely clean and care for your machine to ensure that it
1remains perfectly efficient and has a long working life.
- Clean the machine using a soft brush or cloth.
- Do not wet or spray water over the tool.
- Do not use any detergents or solvents as these may damage
the machine beyond repair. Chemical agents can easily da-
mage the plastic parts.
TROubLESHOOTING
If the machine fails to start:
- check that the ON/OFF switch is in the "I" position.
- check the electrical connections
- check the extension lead or change the power supply socket.
- check the mains switch in your home
If the machine vibrates:
- have it checked by an authorised customer service centre.
IMPORTANT! If the machine still fails to work correctly after
you have carried out the above operations, or in the event of
anomalies other than those described above, take it to an
authorised assistance centre. Always provide the machine
model and serial number shown on the technical data label.
- After use, clean the entire machine and its accessories
carefully (see maintenance paragraph), thus preventing any
mould from forming.
- Keep the machine out of reach of children, in a stable safe
position, in a dry place not subject to extreme temperatures
and free from dust.
- Protect the machine from direct sunlight, keeping it in the
dark where possible, or in the shade.
- Do not close the machine in nylon bags as damp could
form.
- Once the mowing season is over, the machine should be
cleaned thoroughly and you should ensure that all its com-
ponents are in good working order.
DEMOLITION
Electric and electronic waste may contain potentially ha-
zardous substances for the environment and human health. It
should therefore not be disposed of with domestic waste, but by
means of differentiated collection at specific centres or returned
to the vendor in the event of purchasing new equipment of the
same type. The illegal disposal of such equipment may result
in prosecution to the full extent of the law.
Amendments: The text, figures and data correspond to the
standards in place on the date of printing this manual. The
manufacturer reserves the right to update the manual should
any changes be made to the machine.
STORAGE
WARRANTY
The product is protected by law against all non-conformities
with regard to its stated characteristics, provided that it has been
used solely in the way described in this user's instructions,
it has not been tampered with in any way, it has been stored
correctly, it has been repaired by authorised personnel and,
where necessary, only original spare parts have been used.
In the event of industrial or professional use or similar, the
warranty is valid for 12 months.
To issue a request for intervention covered by warranty, proof
of purchase must be shown to the retailer or authorised service
centre.
- 7 -
Tabla de contenido
loading

Productos relacionados para Valex Flow 1300

Este manual también es adecuado para:

1494732

Tabla de contenido