Storing The Electric Blanket; Regular Checks; Assistance And Warranty - Imetec H5605 Manual De Usuario

EN
IT
• Do NOT use the electric blanket until it is completely dry.
HANGING THE ELECTRIC BLANKET TO DRY
• The electric blanket must be hung to dry in the approximate original dimensions. The best results are obtained when it is still damp, pulling a
panel at a time from one end and the other. This may have to be repeated a number of times until the electric blanket is completely dry.
• Make sure the wires are not kinked or twisted. It is easier to check the wires by placing the electric blanket against the light.
• If problems arise with the wires after having hung the electric blanket or if it does not return to its original size, return it to an authorised Imetec
Service Centre for a safety check.
aTTEnTIon! When you store the appliance, let it cool down before folding it.
IMpoRTanT!
When you store the appliance, do noT place objects on top of it which crease it and/or deform it.
The fabric may take on a natural yellow colour over time. This does not compromise the safety and/or performance of the product in
any way.
Check the appliance and the flexible cord often for signs of wear and tear. Should this be noted or in the case of malfunction, take the appliance to
an authorised IMETEC Technical Service Centre. However, we recommend having your electric blanket checked by an authorised Imetec Service
Centre at least once every 3 years.
The packaging is made up of recyclable material. Dispose of it in compliance with the environmental protection standards.
The product must be disposed of appropriately, in compliance with European standard 2002/96/EC. The recyclable materials contained
in the appliance must be collected to prevent environmental pollution. For further information contact the local waste authority or the
appliance retailer.
To request repairs or purchase spare parts, please contact IMETEC's authorised customer service centre on the Number below or via the website.
The appliance is covered by the manufacturer's warranty. For details, read the attached warranty sheet. Failure to comply with the instructions for
use and maintenance provided in this manual will render the manufacturer's warranty null and void.
Tenacta Group s.p.a. Via piemonte 5/11 24052 azzano s. paolo (BG) ITaly
8

STORING THE ELECTRIC BLANKET

REGULAR CHECKS

dIsposal

ASSISTANCE AND wARRANTY

www. imetec.com
Tel. +39.035.688.111 Fax +39.035.320.149