General Information; Description Of The Machine - Sima CAT 202 Manual De Instrucciones Original

1. GENERAL INFORMATION

ATTENTION: Please read and understand perfectly the present instruction before using the machine.
SIMA S.A. thanks you for purchasing the FLOOR SAW model CAT 202 scarifier model.
This manual provides you with the necessary instructions to start, use, maintain and repair the floor saw. All
aspects as far as the safety and health of the users is concerned have been stated. Respecting all instructions and
recommendations assures safety and low maintenance. As such, reading this manual carefully is compulsory for any
person responsible for the use, maintenance or repair of this machine.
As such, reading this manual carefully is compulsory for any person responsible for the use, maintenance or
repair of this machine.
It is recommended to have always this manual in an easily accessible place where the machine is
being used.

2. DESCRIPTION OF THE MACHINE

The scarifier CAT models have been designed and manufactured for use by professionals in the treatment of
horizontal surfaces by the process of erosion with suitable tools for every need, concrete and asphalt surfaces.
• For construction characteristics and depending on the chosen tool for the surface to be treated, the milling of
pavement CAT can perform the following functions:
- Elimination by milling.
- Standard Milling
- Minced
- Striated
- Cleaning
- Elimination of coatings
- Scaling
- Shelly
- Husked
• The milling tool is a set or drum group called dragged by a hexagonal shaft, this group features 4 heat-treated
axles where the wheels are introduced milling grinder separated by washers.
• Incorporates a knob or steering wheel for manual control of the milling depth.
• Incorporates a vacuum cleaner intake for dust collection, thus avoiding contaminating the environment.
• A curtain of rubber prevents the projections started by the tool material, are projected towards the operator-
• As standard the machine drum group incorporates the corresponding cutters equipped with six tip.
• There are two engine versions for this machine, petrol and electric.
• The electric model can be single or three phase.
• CAT model incorporate a quick lifting device milling drum, used to lift it when it is moving and driving the
machine tool without friction along the surface, another use is to lower the drum to the working position, this
device is independent of adjustment of milling depth and is in the grip that is on the handlebar column at a height
easily accessible to the operator.
4
ENGLISH