Charging External Devices; Adjusting The Volume - Midland ER200 Manual De Usuario

has reached full charge, the battery icon will stop flashing and will
have 3 bars. The indicator light will be lit while the unit is charging.

Charging External Devices

Mobile phones and USB-powered devices can be charged using
the USB charge cable for that device. Connect the charge cable
to the USB Outlet port on the side of the ER200 labeled "USB
Out". If ER200 is on it will automatically turn off and go into
charge mode.
Operating ER200
Turning the ER200 On/Off & Selecting a Band
To turn the device on, press the BAND button. To cycle through
AM or FM press the BAND button again.
To turn it OFF, press and hold the BAND button for 2 seconds.

Adjusting the Volume

To adjust the volume, press the UP/DOWN/VOLUME control
buttons.
Tuning the Radio
Press the BAND button to cycle through AM or FM.
Once you are on the desired radio band, you can tune to the de-
sired station with the TUNE UP/DOWN buttons. For best FM
reception, fully extend the telescopic antenna and rotate until
reception is clear.
12 | Midland ER200