Tabla de contenido
Idiomas disponibles
Idiomas disponibles
12. Headphone jack
13. USB Output port
14. USB Input port
15. Dynamo crank
Powering Your ER200
USB Charge Cable
Before the ER200 is used, the internal Li-Ion rechargeable bat-
tery pack should be charged with the USB charge cable until the
battery indicator icon indicates a full charge. To charge the ER200
with the USB cable insert the USB charge cable into a USB power
source and plug the micro USB connector into the port labeled
"USB In" on the side of the device. The battery icon on the LCD
will flash as the battery charges. When the Li-ion battery has rea-
ched full charge, the battery icon will stop flashing and will have 3
bars
. It will take approximately 5.30 hours to recharge a com-
pletely depleted battery pack using the USB charge cable.
10 |
12
13
14
Midland ER200
15
Tabla de contenido
