Kärcher FI6565S Manual Del Usuario página 8

11. Plug the power cord into an electrical outlet.
12. Start vacuum by turning switch on (
This vacuum cleaner is equipped with a HEPA filter which can collect fine dust.
13. Use Filter Cleaning System to maintain performance before and after each use. When
working with fine dust, the filters can get clogged, decreasing the performance of the
vacuum as well as the life of the filters. To operate the Filter Cleaning System:
a. Turn the switch on (I).
b. Detach wands from the end of the flexible hose.
c. See Figure 6. Place the end of the hose in on a flat, solid surface (A). This will close
the air flow and build up pressure in the tank to clean the filter.
d. Wait 10 seconds until pressure is built inside the vacuum cleaner.
e. Push the filter cleaning button (B) quickly 5 times.
14. When the tank needs to be emptied, see Figure 7:
a. Find an appropriate waste bin outside for disposal of material in the tank.
b. Turn switch off (0) and unplug power cord.
c. Detach hose from suction inlet or blower outlet.
d. Remove vacuum head from the tank by pulling gently on the lower part of the
clamps, Figure 2 (C), on the side of the vacuum head.
e. Empty the tank into the bin.
f. Attach vacuum head to tank, ensuring they are securely clamped together.
g. Insert hose into suction inlet.
I
).
Figure 5
Figure 6
Figure 7
8