Quick Start Guide - GBC StreamPunch Ultra Manual De Instrucciones

3. QUICK START GUIDE

StreamPunch Ultra must be connected to AC power to enable any
feature of the machine. Below are three modes of operation of
StreamPunch Ultra.
1. Bypass Mode:
This operation will allow paper to pass through the StreamPunch
Ultra without being punched.
This is the default mode of operation for StreamPunch Ultra.
Make sure the Punch Icon is not selected in the printer's User
Interface.
2. Single Punch Mode:
This operation will punch the trail edge of all sheets that pass
through the StreamPunch Ultra.
Step 1: A properly configured die set must be inserted before
running punch mode. See section 4.A for details on Die set
changes and follow the labels on the die set for configuration.
Step 2: Before starting a print job select the Punch (Single
Punch) icon to enable punching.
StreamPunch Ultra will now function in Single Punch mode.
3. Double Punch Mode:
This operation will punch the two rows of holes- One in the middle
of the sheet and the other adjacent to the trail edge of all sheets
that pass through the StreamPunch Ultra.
Step 1: A properly configured die set must be inserted before
running punch mode. See section 4.A for details on Die set
changes and follow the labels on the die set for configuration.
Step 2: Before starting a print job select the Double Punch icon
to enable punching.
StreamPunch Ultra will now function in Double Punch mode.
StreamPunch
DOWN
Layout of StreamPunch Ultra LCD User Interface
4. Die Set Configuration
To configure the Die Set for the desired sheet size that is being
processed see section 8 – Die Set User Manual.
Ultra/Ultra MP
TM
UP
ENTER/
OK
GB
5