Feature Guide; Power; On/Off Switch; Fuse - GBC Magnapunch 2.0 Manual De Instalación Y Funcionamiento

Magnapunch 2.0 – Installation and Operating Instructions
5. f
eatURe GUide
This chapter helps you identify the main components of the Magnapunch 2.0.
User Interface
Edge Guide and
Tabletop Trigger
Punching Table
Chip Drawer

Punching Throat

p
oWeR
on/off s
WitCh
Use the ON/OFF switch to turn the Magnapunch
2.0 on and off. Press the ON/OFF switch to the I
position to turn the Magnapunch 2.0 On. Press
the ON/OFF switch to the O position to turn the
Magnapunch 2.0 Off.
f
Use
One fuse protects the Magnapunch 2.0 and its
electrical components from current that is higher
than the Magnapunch 2.0 is rated for.
CAUTION: For continued protection against
fire or risk of electrical shock, replace only with the
same type and rating fuse.
To replace a fuse, insert a flat blade screwdriver
into the fuse cover, push, and then turn counter-
clockwise. Replace the fuse, insert into the fuse
holder, and turn it clockwise.
Figure 4. Magnapunch 2.0 Identification.
p
Foot Pedal
The Power Cord plugs into a standard US 115 VAC
NEMA 5-15R (European 230 VAC YP-24 10 to 16
Amp) wall outlet.
p
The Punching Throat is where the media's edge to be
punched is inserted during the punching process.
NOTE: Do not force more media into the throat than
will fit easily.
Lift picker
Die Set
f p
oWeR and oot edal

Power

Service port
Figure 5. Connections on Back of Magnapunch 2.0.
t
UnChinG hRoat

Fuse

ON/OFF switch

C
onneCtoRs
Page 5-1