Daewoo International DTC-310 Guia Del Usuario página 18

From Speakerphone
1. Press SPEAKER key
2. When hearing the dialing tone, dial the desired number.
3. The unit will start to time the conversation after 6 seconds.
4. After finished, press SPEAKER key again.
Pre-dialing function
1. When the handset is on the base, dial the desired number.
2. If there are mistakes, use the DEL key to edit.
3. Press SPEAKER key or pick up the handset the number dialed will be auto-dialed out.
Redial
1. Pick up handset or press SPEAKER key,
2. Press REDIAL key, the last dialed number is dialed again
Auto-redial (this function just for your selection)
1. Press SPEAKER key, dial a number, and the line is busy
2. Press ARD key, the last dialed number is dialed out automatically every 9-10 seconds when
line is always busy.
3. Unit dials the number automatically 32 times.
When there is an incoming call while using auto-redial, pick up the handset or press SPEAKER
key to answer the call. The auto redial function will be terminated.
REVIEWING, CALLING BACK AND DELETING INCOMING NUMBERS
Reviewing
In on-hook state, press UP or DOWN key to review the desired number
Deleting
When review the desired number, press DEL key, the number is deleted,
Press and hold DEL key for 3 seconds, all the incoming messages are deleted.
Calling back
1. Scroll to the desired number, press SPEAKER key or pick up the handset, and the number is
dialed out
2. Or press REDIAL key, LCD displays PICK UP, press SPEAKER key or pick up the handset,
the number is dialed out.
3. Or press and hold REDIAL key till PICK UP flashing, press SPEAKER key or pick up the
handset, the number is dialed out. If the long distance code is set, the telephone will add the
long distance code ahead the number automatically and then dial back. If the PABX code is set,
the telephone will detect and add the code before the number automatically when dialing back
the number. It will dial the PABX code first and then after a 2 second pause and then dial the
number.
18