Samsung FlexDry DV 60M9900 Serie Manual Del Usuario página 58

Troubleshooting
Symptom
Items still wrinkled
after Wrinkle Prevent
(Wrinkle Away,
Wrinkle Release).
Water drips from
the nozzle when the
Steam cycles starts.
Sprayed water is not
visible during Steam
cycles.
Extended time.
If a problem persists, contact a local Samsung service center.
58 English
FlexDry_DM9900M-DC68-03381F_EN.indd 58
Action
• Small loads of 1 to 4 items work best.
• Load fewer items. Load similar-type items.
• Take out the items immediately after drying is complete.
• This is steam condensation. The dripping water will stop after
a short time.
• Sprayed water is difficult to see when the door is closed.
• Sensor Dry automatically senses the moisture in the load
and shuts the dryer off when the selected dryness level is
reached.
The drying time can change according to the type and
amount of laundry. See the cycle chart for reference.
2017-01-24 1:21:47