Loading A Disc; Playing A Disc - Trevi CMP 532 USB Manual De Uso

ENGLISH
CD/MP3 OPERATION
Discs for playback
This system can playback all digital audio CD/MP3/WMA discs, finalized digital audio CD-Recordable
(CD-R) discs and finalized digital audio CD-Rewritable (CD-RW) discs.

LOADING A DISC

1. Set the FUNCTION switch to CD/MP3/USB/AUX IN position.
2. Open the CD door. "OP" will be shown on the display.
3. Place an audio CD into the tray with the label side facing up.
4. Close the CD door, the total number of tracks will appear in the display.
5. To remove the CD, open the CD compartment lid, grasp the CD by its edges, and carefully take it out.
Note:
 To ensure good system performance; wait until the disc tray completely reads the disc before
proceeding.
 If no disc is loaded into the compartment, or the disc is placed upside down, the display will show
" ".

PLAYING A DISC

2. Press the PLAY/PAUSE/STANDBY button on unit or on remote control to start playback. The
playback starts from track 1, "►" will appear on the display.
3. To interrupt playback, press the PLAY/PAUSE/STANDBY button, "►" and the track number will
flash on the display.
4. To resume playback, press the PLAY/PAUSE/STANDBY button again.
5. To stop playback, press the STOP/USB button, the total number of tracks would appear in the display.
SELECTING A DESIRED TRACK/PASSAGE
To select a desired track
 Press the CD SKIP/SEARCH NEXT/BACK button repeatedly in stop mode or during play until the
desired track appears on the display.
 Press the PLAY/PAUSE/STANDBY button to start play.
To search for a particular passage during playback (track scanning at high speed)
Press and hold the CD SKIP/SEARCH NEXT/BACK button to scan the current playing track at high
speed until desired point passage, and then release the button.
Playback will start again from this point.
To select a song which track number exceeds 10（for MP3 disc only）
To select a song/track which number exceeds 10, Press the FOLD.+/+10 button each time to skip
forward/backward 10 tracks, then press the CD SKIP SEARCH NEXT/BACK button to select desired
track. For example: to select the 17
NEXT button six times immediately.
To Select A Desired Folder（for MP3 disc only）
(if the MP3 disc contains more than one folder)
To skip to the desired folder during playback, press and hold the FOLD.+/+10 or FOLD.-/-10 button for
about 2 seconds to skip to next/previous folder.
th
track, press FOLD.+/+10 button, and then the CD SKIP SEARCH
4 10
CMP 532 USB