Packaged Components; Anchoring The Front Panel; Secondary Clamps With Security Buckles - Leer LATITUDE Instrucciones De Instalación Y Manual Del Usuario

LATITUDE INSTALLATION INSTRUCTIONS

5. ANCHORING THE FRONT PANEL

Ensure clamp is positioned under
bed wall flange (standard). Attach to
bracket assembly for units with bracket
assembly. Then, hand tighten until
clamp contacts the truck rail. Tighten
an additional two turns.

6. SECONDARY CLAMPS WITH SECURITY BUCKLES

Ensure clamp is positioned under bed wall flange (standard). Attach to bracket
assembly for units with bracket assembly. Then, hand tighten until clamp
contacts. Tighten an additional two turns.
Secondary clamp
standard
Note: shown with clamps
installed for clarity
Select insert that best aligns the clamp
to the side of the bed
Standard front clamp installation shown.
See instructions in clamp kit for assembly.
DO NOT
USE WRENCH OR
OVERTIGHTEN!
Locations of
clamp and
secondary
clamp
Patented and Patent Pending see LEER.com • 203984 REV J
Note:
Clamp will swivel
sided to side
Secondary clamp
with clamp bracket assembly
5