Stagnoli ALPHEO Manual De Instrucciones página 16

Mounting the articulated arm (Figures 5, 6, 7)
1. the arm must be put in straight by the keyed shaft; position the 11 ∅ x30 washer
and lock the arm with the M10x28 screw.
2. Take the curved arm and fit it in the straight arm's fork; fit the three bushings and
the pin and fasten with the 4∅x24 pin.
3. Release the geared motor by turning the key clockwise, opening the door 90° and
pulling the release knob.
4. Fit the bushing on the other end and lock the curved arm to the gate bracket with
the M12x40 screw and M12 nut.
SHAFT
STRAIGHT ARM
Figure 6
Istruzioni, instructions Instrucciones
Figure 5
BENDED ARM
Figure 7
16