Care And Cleaning - Electrolux EAT8000 Instrucciones De Uso

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 39
822 949 420_EAT8xxx.book Seite 21 Montag, 9. Juni 2008 9:18 09
0 Select the desired colour setting
on the browning control (Fig. 1/A).
Setting 1 for lightest browning.
Setting 6 for darkest browning.
The additional frozen setting
for toasting frozen bread.
We would recommend to adjust a
3
setting that the toast is browned to
a „golden yellow" or „light-brown"
colour. The electronic browning
control ensures that once a brown-
ing setting has been chosen, the
results are always the same for the
same type of bread.
Important: Do not toast stale
1
bread, rice crackers or similar on a
high setting as they may catch fire.
0 Push the toasting lever (Fig. 1/B)
down to commence the toasting
cycle.
The browning control pilot light
illuminates.
When the colour setting is
achieved, the toaster will automati-
cally turn off and slide the toast up.
0 If you need to remove the toast
before the cycle is complete, then
press the STOP button (Fig. 1/F).
The STOP button will immediately
interrupt the toasting cycle and
slide the toast up.
0 To remove small pieces of bread
such as bagels, crumpets or muf-
fins use the High Lift Lever to lift
the toast above the starting posi-
tion. This will prevent burning your
fingers as you remove the toast.
0 After use, remove the plug from
the power outlet.
Reheat function
The reheat function enables you to
warm up already toasted bread to
keep it warm and crisp.
When using the reheat funciton, it
3
is not necessary to change the set-
ting on the browning control
(Fig. 1/A).
0 Position the bread into the bread
slot (Fig. 1/C).
0 Push the toasting lever (Fig. 1/B)
down.
is
The browning control pilot light
illuminates.
0 Then push the reheat button
(Fig. 1/E). The pilot light illumi-
nates.
When the bread is reheated, the
toaster will automatically turn off
and slide the toast up.

Care and Cleaning

Always remove the plug from the
1
power outlet after use and before
cleaning your toaster.
Before cleaning, always leave the
toaster to cool down.
Liquid must not be applied to the
toaster, the toaster must also
never be immersed in liquid.
To clean the exterior
0 Wipe exterior with a slightly damp-
ened cloth and polish with a soft
dry cloth.
Do not use metal scourers or abra-
1
sives as this may scratch the exte-
rior surface.
Removable crumb tray
0 To remove the crumbs, simply
push and slide out the tray, empty
and place it back in the toaster.
Clean the crumb tray regularly.
Do not allow crumbs to accumu-
1
late, as this may cause a potential
fire hazard.
To clean the toaster interior
0 Clean inside the toaster regularly.
To do this, unplug the appliance,
turn it upside down over the sink
and gently shake all the crumbs
out.
g
21
Tabla de contenido
loading

Este manual también es adecuado para:

Eat8100

Tabla de contenido