Tabla de contenido
Idiomas disponibles
Idiomas disponibles
EN
SAFETY INSTRUCTIONS
When using power tools, always
observe the safety regulations
applicable in your country to
reduce the risk of fire, electric
shock, personal injury and material
damage. Read the following safety
instructions before attempting to
operate this product. Keep these
instructions in a safe place!
1. Keep work area clean. Cluttered
areas and benches can cause
accidents.
2. Consider work area environment.
Do not expose power tool to
humidity. Keep work area well
lit (250 – 300 lux). Do not use
power tools in the presence of
inflammable liquids or gases.
3. Keep children away. Do not let
children come into contact with
the tool or extension cord. Keep all
people away from the work area.
4. Dress properly. Do not wear
loose clothing or jewelry. They
can be caught in moving parts.
Preferably wear Rubber gloves and
non-slip footwear when working
Outdoors. Wear protective hair
covering to keep long hair out of
the way. When working outdoors,
preferably wear suitable gloves and
non-slip footwear.
5. Personal protection. Always use
safety glasses. Everyday eyeglasses
only have impact resistant lenses,
they are not safety glasses. Use a
face or dust mask whenever the
operations may production dust or
flying particles. If these particles
might be considerably hot, also
wear a heat-resistant apron. Wear
ear protection whenever the sound
level seems uncomfortable, i.e., if
the sound pressure stated in this
manual exceeds 85 dB(A).
6. Guard against electric shock.
Prevent body contact with earthed
surfaces (e.g. pipes, radiators,
cookers and refrigerators). For
use under extreme conditions (e.g.
high humidity, when metal swarf
is being produced, etc). Electric
safety can be improved by inserting
an isolating transformer or an earth
leakage circuit-breaker.
7. Do not overreach. Keep proper
footing and balance at all times.
8. Stay alert. Watch what you are
doing. Use common sense. Do not
operate the tool when you are tired.
9. Secure work piece. Use clamps
or a vice to hold the work piece. It
is safer and it frees both hands to
operate the tool.
10. Connecting dust extraction
equipment. If devices are provided
for the connection of dust extraction
and collection ensure these are
connected and properly used,
especially in confined areas.
11. Remove adjusting keys and
wrenches. Always check that
adjusting keys and wrenches are
removed from the tool before
switching on.
12. Extension cords for outdoor use.
When the tool is used outdoors,
only use extension cords intended
for outdoor use and marked
accordingly. Before use, inspect
the extension cable and replace if
damaged.
13. Use appropriate tool. The
intended use is laid down in this
instruction manual.
Do not force small tools or
attachments to do the job of a
heavy-duty tool.
The tool will do the job better and
safer at the rate for which it was
intended. Do not force the tool.
Warming!
The use of any accessory or
attachment or performance of
any operation with this tool, other
than those recommended in this
instruction manual may present a
risk of personal injury.
14. Check for damaged parts.
Before using the tool, carefully
check it for damage to ensure that
it will operate properly and perform
its intended function. Check for
misalignment and seizure of moving
parts, breakage of parts and any
other conditions that may affect is
operation. Have damaged guards
or other detective parts repaired or
replaced as instructed. Do not use
the tool if the switch is detective.
15. Disconnect tool. Switch off
and wait for the tool to come to a
complete standstill before leaving it
unattended. Unplug the tool when
not in use, before servicing or
changing accessories.
16. Avoid unintentional starting.
Do not carry the p Jugged-in tool
with a finger on the switch. Be sure
that the switch is released when
plugging in.
17. Do not abuse cord. Never carry
the tool by its cord or yank it to
disconnect from the socket, keep
the cord away from heat, oil and
sharp edges.
18. Store idle tools. When not in
use, power tools must be stored in
a dry place and locked up securely,
out of reach of children.
19. Maintain tools with care.
Keep the tools in good condition
and clean for Petter and safer
performance. Follow the
instructions for maintenance and
changing accessories inspect the
tool cords at regular intervals and
keep all controls dry, clean and free
from oil and grease.
13
Tabla de contenido
