Environmental Protection; Technical Specifications - Metabo PowerMaxx Li LC 60 Instrucciones De Manejo

17026810_0107 PowerMaxx_Li.book Seite 12 Mittwoch, 17. Januar 2007 10:03 10
ENGLISH
ENG
machine and tighten the clamping screw with
the enclosed Allen key.
C Battery pack
D Bit clamping bush
E Bit box
13 Repairs
Repairs to electrical tools and chargers
must be carried out by qualified electri-
cians only.
If the mains connection cable of this charger is
damaged, in order to prevent endangering
personnel and property it must be replaced by the
manufacturer, or the Customer Service of the
manufacturer, or a similarly qualified person.
Metabo machines requiring repairs can be sent to
the address specified on the spare-parts list.
Please enclose a description of the fault with the
power tool.

14 Environmental Protection

Metabo's packaging can be 100% recycled.
Scrap power tools and accessories contain large
amounts of valuable resources and plastics that
can be recycled.
These instructions are printed on chlorine-free
bleached paper.
Battery packs must not be disposed of with regular
waste. Please return faulty or used battery packs
to your Metabo dealer.
Do not throw battery packs into water.
Only for EU countries: Never dispose of
power tools in your household waste! In
accordance with European Guideline 2002/
96/EC on used electronic and electric equipment
and its implementation in national legal systems,
used power tools must be collected separately
and handed in for environmentally compatible
recycling.

15 Technical Specifications

Explanatory notes on the specifications on page 2.
Changes due to technological progress reserved.
PowerMaxx Li:
U = Voltage of battery pack
n = No-load speed
Tightening torque for screwing:
M = soft screwing application (wood)
A
M = hard screwing application (metal)
B
12
M = adjustable torque (with torque
C
control)
M = maximum tightening torque. When
D
used as a screwdriver.
Max. drill diameter:
D = in steel
1 max
D = in softwood
2 max
m = weight (with battery pack)
G = Spindle thread
a = Typical estimated acceleration in the
hw
hand/arm area
Typical A-effective perceived sound levels:
L = Sound pressure level
pA
K = Unsafe
pA
Battery charger LC 60:
A = Voltage of the battery packs
B = Charging current
C = Charging time
battery pack capacity
1)
Depending on the residual capacity and the
temperature of the battery pack, real charging
times may deviate from the specifications.
Measured values determined in conformity with
EN 60745.
The technical specifications quoted are subject to
tolerances (in compliance with the relevant valid
standards).
1)
as a function of the