Adjust The Attachment Position And Record - Panasonic VW-CLT2 Instrucciones De Funcionamiento

Adjust the attachment position and record

When using for the first time, be sure to adjust the 3D Conversion Lens attachment position.
≥ Change the mode to
1
Attach the 3D Conversion Lens to the
video camera. (l 10)
2
Turn on the video camera.
≥ Turn on with the video camera in a horizontal state.
≥ The 3D Conversion Lens adjustment mode screen
will appear automatically after performing the initial
setting.
≥ If the 3D Conversion Lens adjustment mode
screen does not appear automatically, set from
the menu on the video camera.
([SETUP] # [3D CONV. LENS SETUP])
.
on the video camera
3
Attach the lens front cap to the 3D
Conversion Lens. (l 14)
A Guide Line
≥ The horizontal line for adjustment on the lens front
cap is displayed on the screen.
≥ Perform the adjustment in a bright location where the
horizontal line for adjustment will be clearly visible.
4
Touch [ADJUST].
≥ If the black vertical line and the black horizontal line
are within the red guidelines A and adjustment is not
required, touch [EXIT] and proceed to Step 11.

15
(ENG)VQT4A75