Attaching/Detaching The Lens To/From The Video Camera - Panasonic VW-CLT2 Instrucciones De Funcionamiento

Attaching/Detaching the Lens to/from the video
camera
≥ To attach the 3D Conversion Lens to the video camera with a filter diameter of 46 mm, a supplied step up ring is
required.
1
Rotate the lens rear cap (for the 3D Conversion
Lens) in the direction indicated by the arrow.
(Only for the video camera with a filter diameter of 46 mm)
After removing the lens rear cap from the step
up ring, slide the 3D Conversion Lens
attachment lever to LOCK while pressing down
the Lock button on the lever, and attach the step
up ring.
≥ Slide the upper and lower attachment levers while pressing
them down with your fingers.
≥ Attach the step up ring to the 3D Conversion Lens with the
[3UP] mark side up.
≥ Attach the step up ring to the 3D Conversion Lens first, and then
attach the step up ring part to the video camera.
≥ Video is not recorded properly when only the step up ring is
attached to the video camera.
10
VQT4A75(ENG)

A the convex
B the concave
UP
