Horizontal Alignment - SKF TMEA 1P/2.5 Instrucciones De Uso

3.8.4

Horizontal alignment

The values now indicated on the
display give the relative positions
of the Movable machine when
viewed from above (fig. 27). The
left value for the front pair of feet,
the right value is for the rear pair
of feet.
Feet values
The alignment values indicate the necessary corrective sideways
movement of the Movable machine (when viewed from behind the
Movable machine). A negative value means that the feet have to be
moved to the right. A positive value means that the feet have to be
moved to the left (fig. 28).
Fig. 28. Horizontal alignment
Note!
will bring back the horizontal coupling values.
will bring back the vertical coupling values.
The measuring units should then be repositioned to the 12 o'clock
position.
If the coupling values both in the vertical and horizontal plane are within
the acceptable tolerances the alignment procedure is finished.
TMEA 1P/2.5 / TMEA 1PEx
Fig. 27. Horizontal alignment
Feet values
Shaft Alignment Tools 27