Installation Of The Appliance; Room Ventilation - Angelo Po 0N1CP1EL Manual De Uso

INSTALLATION OF THE APPLIANCE

All installation stages must be considered right
from production of the general layout.
Before starting these stages, as well as deciding
the place of installation, if necessary, the person
authorised to carry out these operations must
organise a "safety plan" to protect the people di-
rectly involved, and he must also ensure strict
compliance with all legal requirements, especially
those relating to mobile work-sites.
The place of installation must have all the con-
nections needed to supply the appliance and dis-
pose of the production residues, must be suitably
lit and must meet all legal health and hygiene re-
quirements to prevent the contamination of the
foods.
If necessary, fi x the exact position of each indi-
vidual appliance or subassembly by mark coordi-
nates to locate them correctly. (see explanatory
diagram).
Appliances must be at some distance from the
wall (at least 5 cm if the wall is not designed to
be resistant to a temperature of at least 150°C).
Install in accordance with the relevant legislation,
regulations and specifi cations in the country of
use.
GB

ROOM VENTILATION

Important
The room where the appliance is installed
must have air inlets to ensure that the appli-
ance can operate correctly and provide the
necessary air exchange in the room itself.
Important
The air inlets must be of appropriate size and
must be protected by gratings and placed so
that they cannot be obstructed.
- 8 -
3320040_inst_GB_rev.1 ENGLISH