Switching The Actual Distance Indicator (F4) On Or Off - Nikon COOLSHOT PRO STABILIZED Manual De Instrucciones

„ Switching the Actual Distance Indicator (F4) ON or OFF
„
When the Actual Distance Indicator setting is ON and the measurement display mode is set to actual
distance mode, the Actual Distance Indicator blinks while the Laser Rangefinder is ON. You can find out at
a glance that the inclinometer function is not being used. Factory default setting is On (on).
1. Press the PWR button to turn on the Laser Rangefinder.
2. Press and hold the MODE button.
3. Press the MODE button three times.
• You can now change the Actual Distance Indicator.
4. The setting switches every time you press the PWR button.
(on)
• If you press the MODE button or do not operate the buttons for about
8 seconds, the displayed setting is saved and the Laser Rangefinder returns
to standby.
• The setting is saved even when the Laser Rangefinder is turned OFF.
(off )
En
Es
Fr
De
It
Sv
Nl
Ru
Pb
Pl
Fi
No
Dk
Cz
Ro
Hu
17