Tabla de contenido
2) Configure the parameters. See Table 4-38.
Parameter
Name
Action
Direction
Filter target
AI recognition
3) Press and hold down the left button on the monitoring screen to draw the monitoring area.
4) Click OK to complete the rule setting.
Step 3 Click
, you can refer to "4.7.2.4.1 Tripwire" to set other parameters.
Step 4 Select Enable check box and click Apply to complete the intrusion setting.
Figure 4-138
Table 4-40
Description
Customize the rule name.
Set the intrusion action, including appear and crossing area.
Set the direction to cross the area, including enter, exit and both.
to filter the target. Check the blue wireframe and adjust the size of the area
Click
with the mouse.
Each rule can set 2 target filters (maximum size and minimum size), that is, when the
passing target is smaller than the minimum target or larger than the maximum target, no
alarm will be generated. The maximum size should not be smaller than the minimum size.
Select AI recognition and the system displays alarm target. The default selection is person
and motor vehicle and system automatically identifies the person and motor vehicle
appeared within the monitoring range.
230
User's Manual
Tabla de contenido
