Tabla de contenido
Parameter
Repeat Alarm Time
Step 6 Click OK.
4.7.1.4.3 People Exception Detection
When the number of people and alarm type are reached in the same detection area, an alarm will be triggered.
Step 1 Select Main Menu > AI > Parameters > Stereo Analysis.
Step 2 Select a channel and click Add.
Step 3 Select Enable and set Type to People Exception Detection.
Step 4 Click
Step 5 Configure parameters.
Parameter
Sensitivity
Duration
Repeat Alarm Time
Alarm People No.
Step 6 Click OK.
4.7.1.4.4 People Retention Detection
When the target stays beyond the set retention time threshold in the detection area, an alarm will be triggered.
Step 1 Select Main Menu > AI > Parameters > Stereo Analysis.
Step 2 Select a channel and click Add.
Step 3 Select Enable and set Type to People Retention Detection.
Step 4 Click
Step 5 Configure parameters.
Parameter
Sensitivity
Duration
Repeat Alarm Time
Alarm People No.
Description
Set repeat alarm time. If the alarm status continues, an alarm will be trigger again
when repeat alarm time is reached.
, and then click and hold left mouse key to draw an area on the screen.
Table 4-32
Description
Set alarm sensitivity.
Set the minimum time of triggering an alarm when the number of people reaches
threshold.
Set repeat alarm time. If the alarm status continues, an alarm will be trigger again
when repeat alarm time is reached.
When the interval between people in the area is greater than or equal to or less
than the set interval threshold, an alarm will be triggered.
, and then click and hold left mouse key to draw an area on the screen.
Table 4-33
Description
Set alarm sensitivity.
Set the minimum time of triggering an alarm when people stay in the detection area.
Set repeat alarm time. If the alarm status continues, an alarm will be trigger again
when repeat alarm time is reached.
When the interval between people in the area is greater than or equal to or less
than the set interval threshold, an alarm will be triggered.
207
User's Manual
Tabla de contenido
