Tabla de contenido
Parameter
Name
Direction
Filter target
AI Recognition
3) Press and hold down the left button on the monitor screen to draw the line. The line can be a straight line
or a curve.
4) Click OK to complete the rule setting.
Step 3 Click
.
The Parameters interface is displayed. See Figure 4-136.
Step 4 Configure the parameters.
Table 4-38
Description
Customize the rule name.
Set the tripwire direction, including A→B, B→A and A↔B.
to filter the target. Check the blue wireframe and adjust the size of the area
Click
with the mouse.
Each rule can set 2 target filters (maximum size and minimum size), that is, when the
passing target is smaller than the minimum target or larger than the maximum target, no
alarm will be generated. The maximum size should not be smaller than the minimum size.
Select AI recognition and the system displays alarm target. The default selection is
person and motor vehicle and system automatically identifies the person and motor
vehicle appeared within the monitoring range.
When you select IVS of AI by camera, the connected channel shall support tripwire
function.
Figure 4-136
227
User's Manual
Tabla de contenido
