Basic Settings - Zanussi ZDLN6531 Manual De Instrucciones

1)
Programme
Machine Care
1) The pressure and the temperature of the water, the variations of the mains supply, the options and the
quantity of dishes can change the values.
2) In accordance with the 1016/2010 regulation
3) In accordance with the 2019/2022 regulation
Information for test institutes
To receive the necessary information for conducting
performance tests (e.g. according to EN60436),
send an email to:
[email protected]
In your request please include the product number
code (PNC) found on the rating plate.

BASIC SETTINGS

You can configure the appliance by changing basic
settings according to your needs.
Number Settings
1 Water hardness
2 Rinse aid empty
notification
3 End sound
4 Auto door open
5 Key tones
6 Latest pro-
gramme selec-
tion
1) For more details, refer to the information provided in this chapter.
You can change the basic settings in setting mode.
Instructions on how to configure the appliance are
provided further in this chapter.
Water (l)
8.4 - 10.2
For any other questions regarding your dishwasher
please refer to the service book provided with your
appliance.
Values
From level 1L to
level 10L
1d (on)
0d (off)
1b (on)
0b (off)
1o (on)
0o (off)
1F (on)
0F (off)
1H (on)
0H (off)
When the appliance is in setting mode, the display
shows a digit and a letter. For each setting, a
dedicated letter is displayed. The dedicated letters
are indicated in the table.
Energy (kWh)
0.60 - 0.71
Description
Adjust the level of the water softener according
to the water hardness in your area.
Factory setting: 5L.
Activate or deactivate the rinse aid indicator.
Factory setting: 1d.
Activate or deactivate the acoustic signal for the
end of a programme.
Factory setting: 0b.
Activate or deactivate the AirDry.
Factory setting: 1o.
Activate or deactivate the sound of the buttons
when pressed.
Factory setting: 1F.
Enable or disable the automatic selection of the
most recently used programme and options.
Factory setting: 0H.
Duration (min)
60
1)
9