Preparing For Installation - Mec MX975 Manual De Instrucciones

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 47
E n g l i s h
3
|
It is not advised to place it near heat, fryers or other hot liquids. If this is not possible at least
respect the following distances from machinery: 50 cm from the sides and above the appliance
and 70 cm from behind.
Do not place the device near materials or containers of inflammable liquids (such as walls,
furniture, screens, gas canisters) as it can be a fire hazard. If this is not possible, cover the
inflammable parts with fire and heatproof material and by checking fire hazard regulations.
IV.

PREPARING FOR INSTALLATION

Remove the outer packaging (wooden caging and/or carton box) and dispose it in compliance
with the laws in force in the country of installation.
REMOVING PROTECTIVE FILM ETC.
Remove the protection film from the
external and internal walls. (See image)
Remove all information covering from
the inside, and take off all plastic
packaging.
STANDS ADJUSTMENT
Do not use the appliance without feet.
Take the feet from inside, raise the
device on one side and screw them in the
positions shown. They have threaded
inserts (see image).
If they are not used, this prevents airflow
from cooling the electric parts and
outsides of the device which causes
over-heating
and
damage
to
components.
By placing the appliance flat it will ensure
correct functioning. This can be achieved
by fitting the stands correctly and using a
spirit level.
Tabla de contenido
loading

Productos relacionados para Mec MX975

Este manual también es adecuado para:

M945M2375

Tabla de contenido