Technical Specifications; Device Disposal - FLAEM Elisir MasterNeb Manual De Instrucciones

TECHNICAL SPECIFICATIONS

Mod. ELISIR F1000
Voltage: 230V~ 50Hz
Approvals:
Max pressure:
Compressor air delivery:
Noise (at 1 m):
Operation:
Operating Conditions:
Temperature:
Air humidity:
Atmospheric pressure:
Storage conditions:
Temperature:
Air humidity:
Atmospheric pressure:
Dimensions:
Weight:
APPLIED PARTS
Type BF applied parts are:
RF6 Plus NEBULIZER
Minimum medication capacity:
Maximum medication capacity:
OPERATING
MMAD μm
(2)
PRESSURE bar
0.9
Data shown is in accordance with Flaem Nuova internal procedure I29-P07.5.
(1)
Research GmbH Co. KG on behalf of TÜV Rheinland LGA Products GmbH – Germany in compliance with the new European Standard
for aerosol therapy units, Standard EN 13544-1. Further details are available upon request.

DEVICE DISPOSAL

In compliance with the Directive 2012/19/EC, the symbol printed on the device
shows that the device to be disposed of is considered waste and must therefore be
an item of ''differentiated collection'' . Consequently, the user must take it (or have it
taken) to the designated collection sites provided by the local authorities, or turn it in to
the dealer when purchasing an equivalent new device. Differentiated waste collection and
the subsequent treatment, recycling and disposal procedures promote the production of
devices made with recycled materials and limit the negative effects on the environment
and on health caused by potential improper waste management. The unlawful disposal
of the product by the user could result in administrative fines as provided by the laws
transposing Directive 2012/19/EC of the European member state or of the country in
which the product is disposed of.
115V~ 60Hz
140VA
2.6 ± 0.4 bar
approx 10 l/min
approx 57 dB (A)
Continuous
min 10°C; max 40°C
min 10%; max 95%
min 69KPa; max 106KPa
min -25°C; max 70°C
min 10%; max 95%
min 69KPa; max 106KPa
20 (W) x 30 (D) x 10 (H) cm
2.100 Kg
patient accessories (C2, C3, C4, C5)
2 ml
8 ml
BREATHABLE FRACTION
(2)
< 5 μm (FPF) %
3.2 73
220V~ 60Hz
DELIVERY ml/min
(1)
open valve-
holder MAX
(approx.)
0.42
In vitro characterization carried out at the Inamed
(2)
18
100V~50/60Hz
closed valve-
holder MIN
(approx.)
0.26