Premier ED-5054PL Manual De Instrucciones página 11

opening. Attach blade assembly/skirt on to jar by screwing the smaller side clockwise onto jar until
secure.
Set skirt into place on blender base, making sure it is securely seated by twisting jar clockwise until it

snaps in to the locked position. You may not hear an audible snapping sound, but will feel it lock into
place.
Plug cord into outlet.

Put ingredients in jar, place lid with filler cap in place on jar making sure it is pushed down

completely into position.
Process food or beverages. Place hand on lid when blending liquids. Push desired button on control

panel to start blender.
Always turn blender OFF and wait until blade have stopped rotating before removing jar or lid.

To remove jar after blending is complete, hold blender base with one hand, grasp skirt and jar with

the other hand and twist both skirt and jar together, counterclockwise approximately a quarter turn to
unlock, then lift jar straight up from base.
Never place jar onto unit while motor is running.

Never run empty.

Never run without jar.

Using the Blender's Special Features
The six speeds are Puree, Chop, Mix, Liquefy, Shake and Smoothie.
The blender has a "Pulse" button that is a controlled cycle operation. This means it operates only while
the button is held down. All other speeds are continuous cycle operation. They operate continuously at
whatever speed is selected until the "Off" button is pressed. Pulse speed is same as "Smoothie", which
is maximum speed.
For continuous Operation
Rest one hand on top of blender jar with lid securely in place. Press desired speed button to turn blender
on. Press "Off" button to turn blender off.
For controlled Cycle Operation
Rest one hand on top of blender jar with lid securely in place. Press "Pulse" button and hold down for
about 2 seconds. Release "Pulse" button and allow blades to coast to a stop. Repeat cycles until
contents reach desired consistency. Release of the "Pulse" button turns blender off.
Note: "Pulse" button can be held longer than 2 seconds as needed.
Pulse Button
For instant control, the pulse function operates only as long as the button is held down. The blender
motor stops when the button is released.
Processing hot foods or liquids in the blender may cause hot liquid to spurt out when the cover is

removed. Always remove the filler-cap from the cover before blending hot foods or liquids. Jar will
become hot from hot contents.
P-4