Nilfisk Bravo Instrucciones De Manejo página 9

Change of dust bag and fi lters
The size and quality of the dust bag
and fi lters affect the machine effi cien-
cy. Use of non original dust bags or
non original fi lters can cause restricted
air fl ow which may lead to machine
overload. Using non-original dust bag
or fi lters will void the warranty.
3
Changing the dust bag
The dust bag must be changed if the
lamp is constantly on when the ma-
chine is operating at maxiumum power
and the nozzle is raised from the fl oor.
Always use original dust bags.
1. Release the hose connection from
the suction inlet.
2. Open the lid by pushing the button.
3. Remove the dust bag.
4. Insert the new dust bag by guiding
the cardboard into the tracks and
push it down.
5. Unfold the new dust bag carefully.
Check that the dust bag is correctly
fi tted.
6. Close the lid.
7. Insert the hose connection into the
suction inlet.
4 Changing the prefi lter
The prefi lter protects the motor by
absorbing micro-particles that the dust
bag can not keep. Change the prefi lter
with every fi fth dust bag. The prefi lter
is located behind the dust bag. Always
use original fi lters.
1. Release the hose connection from
the suction inlet.
2. Open the lid by pushing the but-
ton.
3. Remove the dust bag.
4. Take out the fi lter holder with
prefi lter.
5. Open the fi lter holder.
6. Take out the prefi lter.
7. Fit the new prefi lter. Check that
the prefi lter is correctly fi tted in the
holder.
8. Put the fi lter holder into the track
and push in place.
9. Insert the new dust bag by guiding
the cardboard into the track and
push it down.
10. Unfold the new dust bag carefully.
Check that the dust bag is cor-
rectly fi tted.
11. Close the lid.
12. Insert the hose connection into
the suction inlet.
Bravo
EN
DE
FR
ES
PT
IT
NL
SV
NO
DA
FI
9