Tool Specifications; Machine Elements; Intended Use; For Your Safety - Bosch GBM 16-2 E Instrucciones De Servicio

EURO • Printed in Germany • BA 3 609 929 468 • GBM 16-2 • GB • OSW 02.05
3 609 929 468.book Seite 1 Donnerstag, 2. Mai 2002 10:51 10

Tool Specifications

Drill
Order number
Rated power
Output power
No-load speed
1st gear
2nd gear
Chuck clamping
range max.
Drilling dia., steel
1st/2nd gear
Drilling dia., wood
1st/2nd gear
Drilling dia., aluminium
1st/2nd gear
Weight approx.
Protection class
Please observe the order number of your machine.
The trade names of the individual machines may vary.

Machine Elements

1 Key chuck
2 Gear selector
3 Lock-on button
4 On/Off switch
5 Chuck key
6 Depth stop
7 Wing bolt for depth stop adjustment
8 Auxiliary handle
9 Allen key
Not all of the accessories illustrated or described are
included as standard delivery.

Intended Use

The drill is designed for drilling in wood, metal,
ceramic and plastic.

For Your Safety

Working safely with this ma-
chine is possible only when the
operating and safety information
are read completely and the in-
structions contained therein are
strictly followed. In addition, the
general safety notes in the enclosed booklet
must be observed.
Wear safety goggles.
7 • 3 609 929 468 • TMS • 18.04.02
GBM 16-2 E
0 601 120 6..
[W] 900
[W] 475
[rpm] 520
[rpm] 1 200
[mm] 16
[mm] 16 / 8
[mm] 40 / 20
[mm] 20 / 13
[kg] 3.6
/ II
English - 1
Wear sturdy shoes.
For long hair, wear hair protection. Work only
with closely fitting clothes.
If the mains cable is damaged or cut through
while working, do not touch the cable but im-
mediately pull the mains plug. Never use the
machine with a damaged cable.
Connect machines that are used in the open
via a residual current device (RCD) with an ac-
tuating current of 30 mA maximum. Use only
extension cables that are approved for outdoor
use.
The machine may be connected only to prop-
erly earthed mains. The socket and extension
cable must have a functional protective con-
ductor.
Insert the mains plug only when the machine is
switched off.
Always direct the cable to the rear away from
the machine.
When drilling use the auxiliary handle 8.
Hold the power tool only by the insulated
gripping surfaces, when performing an op-
eration where the cutting tool may run into
hidden wiring or its own cord.
Contact with a "live" wire will make exposed
metal parts of the tool "live" and shock the op-
erator.
Use appropriate detectors to determine if
utility lines are hidden in the work area or
call the local utility company for assist-
ance.
Contact with electric lines can lead to fire and
electric shock. Damaging a gas line can lead
to explosion. Penetrating a water line causes
property damage or may cause an electric
shock.
If the drilling tool jams, it will cause the power
tool to jolt. If this occurs switch the machine off
immediately.
When working with the machine, always hold it
firmly with both hands and provide for a secure
stance.
Always switch the machine off and wait until it
has come to a standstill before placing it down.
Never allow children to use the machine.
Bosch is only able to ensure perfect operation
of the machine if the original accessories in-
tended for it are used.