Steren INT-200 Manual De Instrucciones página 15

INSTALLING INTERCOM
It is recommended that you install the camera at a
4.5 – 5 feet height.
1. Select the location where you want to install
the intercom and make corresponding drilling
according to the plastic sheet. Then set the plate
with screws.
2. Connect the intercom cable of buzzer according
to the corresponding number.
In case of an electric lock (not included), connect
the cables in S1 and S2 intercom.
3. Hold the intercom at the base of plastic
previously installed.
4. Connect the power cord to an electrical contact
near the intercom.
15