Stiga RC 685 Manual De Instrucciones página 116

2. First-level maintenance (every 150 hours of work)
1) Conduct all items of maintenance for each shift.
2) Clean transmission box, and change engine oil.
3) Check, test and adjust clutch, gear shift system and reverse gear system
3. Second-level maintenance (every 800 hours of work)
1) Conduct all items of the maintenance for every 150 hours of work.
2) Check all gears and bearings, if any of them is severely worn, replace it.
3) If any of the tiller's other parts and components, such as any tilling blade or bolt, is
damaged, please replace it!
4. Technical check and repair (every 1500-2000 hours of work)
1) Disassemble the whole machine at a local authorized service shop to clean and check it, and
if any of the parts and components is severely worn, replace it or repair it if it is appropriate to
do so.
2) Ask repair and maintenance professionals to check friction disks and clutch..
5. Repair and maintenance of gasoline engine shall be conducted as per the manual
III Table of mini-tiller's technical maintenance (an item marked with √ shall be maintained)
Maintenance must be proceeded in authorized Service Center.
Work interval
Content of
maintenance
Check and tighten
bolts and nuts
Check and add
new engine oil
Clean and change
engine oil
Check if there's oil
leakage
Clean dirt, weeds,
and oil stains
Solve problems
Adjust operating
parts
Tension belt
Gears and
bearings
After 8
hours of
Every day
work under
a half load
√
√
(First time)
√
√
√
√
√
After the After the
first month third month
or after 20 or after 150
hours hours
(Second (Third time
time) and
thereafter)
15
Every year Every 2
or 1,000 years or
hours 2,000 hours
√