Brita Tap Manual De Instrucciones página 13

For models WD 3030 and WD 3040 only
These models have an aerator with two integrated outlets. The
Inner one is for B RITA filtered water, the outer area for hot and cold
water. As with every tap aerator, there can be lime scale build up
in the outer area. Therefore it is recommended to clean the aerator
on a regular basis. For cleaning: Unscrew the cap on the end of the
dispensers neck. The aerator is connected to a silicon hose. Detach
it carefully and clean the aerator (e.g. with vinegar). After cleaning
connect the long, thin part on the back of the aerator carefully with
the silicon hose. Place the cap over the aerator and screw it tight.
Make sure that the gasket in the cap is seated correctly. When
installed correctly there should not be any leaks whilst running hot,
cold or B RITA filtered water.
If you want to replace the aerator with a new one, you can order
it from B RITA. You can find the contact details for your B RITA
customer service team next to your country code on the back of
this booklet.
(fig. 12)
Spare Part Name
1012909
1004715
(fig. 13)
Article No. Spare Part Name
1004715 Gasket On Line 3/8" 2 mm CE + AU
1004713 Gasket On Line 1/2" 2 mm CE + AU
1004699 Hose On Line 3/8" IT - 3/8" IT CE
1012909 Filter Head G3/8" Tap spare part
1004674 B RITA cartridge exchange indicator
1004690 Adapter 1/2" IT - 3/8" ET
1005821 T-piece 3/8"
1004674
1004699
1005821
1004690
1004713
13
ENGLISH