Tabla de contenido
Idiomas disponibles
Idiomas disponibles
ATTENTION:
When used for stripping frames, use the protection nozzle 6.
Don't keep the tool directed at a point for too long of a period to avoid igniting the surface.
Avoid paint build-up on the scraper accessory, since it may catch fire. If necessary, carefully remove the left
over paint from the scraper accessory using a knife
5. Stationary use
This tool can be used in a stationary mode. Follow the recommendations below:
• Place the heat gun on the work bench;
• Attach its cable to prevent it from falling off the bench;
• Carefully turn on the heat gun;
• Make sure the nozzle is always pointed away from you and all persons or animals close to the workplace.
• Make sure not to drop anything into the nozzle.
8. PREVENTIVE MAINTENANCE
Before performing any cleaning or maintenance, disconnect the product from the mains and wait for
complete cooling of the device.
ATTENTION:
recommendations below:
1. Maintenance and cleaning:
A. Before performing any cleaning or maintenance, disconnect the product from the mains;
B. Clean the vents weekly, using a soft cloth;
C. If the dirt does not come off, use a soft cloth dampened with water and mild soap.
D. Your tool requires no additional lubrication.
NOTE: Never clean the tool using solvents such as gasoline, alcohol, ammonia, etc. These products can damage
the heat gun's plastic parts. Use only mild soap.
IMPORTANT
the risk of accidents or damage to the product.
2.Transporting and storing:
A. Never use the cord for carrying, pulling or unplugging the power tool or allow its contact with edges, sharp
elements, rough surfaces, oil or chemicals that may damage its fl exible and insulating properties.
B. Store the tool in a clean, dry place protected from moisture and dust. Keep your tool out of reach of children
and people unfamiliar with the use of the equipment.
3. Repairs:
If required to perform any repair or replacement, contact the nearest Schulz Authorized Dealer. Original parts
Schulz must be used. The use of non-original parts results in warranty loss and may cause damage to the equi-
pment or injury.
Don't strip metal windows because the heat conducted on the glass may break it.
In order to ensure smooth operation and extend the life of your equipment, follow the
When servicing, use only original replacement parts. Use of any other parts can cause
32
Tabla de contenido
