Tabla de contenido
Idiomas disponibles
Idiomas disponibles
7. OPERATION
1. Temperature adjustment
The heat gun has two temperature options. You can choose the speed of the airflow by changing the position of
the on/off switch 4 to "I" or "II". After this adjustment, you can gradually increase or decrease the temperature
by turning the temperature adjustment button 3 to
Check Table 7.1 for the most suitable temperature option for each service.
IMPORTANT
raise the temperature to achieve the best results.
TEMPERATURE
From 50 to 350 ªC
From 100 to 600 ªC
TABLE 7.1 – RECOMMENDED TEMPERATURE FOR APPLICATIONS
2. Installing accessories
This product is supplied with accessories which can be installed according to the desired application:
•
Flat nozzle (5) : Drying, thawing (spreading heat over large areas).
•
Protection nozzle (6): Applying vinyl.
•
Cone nozzle (7): Welding of small areas (heat concentrated on a small area).
•
Scraper (8): Stripping paint and varnish.
•
Reflector nozzle (9): Welding tubes.
ATTENTION
nozzle cooled. Contact with the hot nozzle can cause severe burns.
To avoid electrical shock, unplug the product from the outlet before changing accessories.
If you are unsure about the correct setting, start with a low temperature and gradually
Position I
Position II
Before placing or changing a nozzle, make sure that the device is switched off and the
or
APLICATION
- Drying paint
- Drying wet wood
- Removal of adhesives
- Adhesive sticker or pressure-sensitive adhesive tape
- Heating depilation wax
- Shrinking plastic and heat shrink packaging
- Defrosting water pipes
- Welding thermoplastic polymer, PVC coated materials and coated fabric,
canvas and sheets.
- Bending pipes and plastic sheets.
- Plumbing soldering: tin, special silver solder, SMD components, cable
terminals.
- Loosen rusted or firmly attached nuts and bolts.
- Removal of old coatings and thick oil paint, lacquer, varnish and synthetic
gypsum.
ATTENTION: When using this temperature option, do not heat wood
surfaces excessively. Risk of fire.
30
Tabla de contenido
