Communication With The Entry Panel; Connection With The Entry Panel - Fermax 4545 Manual De Instalador Y Usuario

TELEPHONE INTERFACE
If during the external call a call is made from the entry panel, the following occurs:
- If the entry panel calls before picking up the phone, it will not be answered and you will
lose the call (the external call has priority).
- If the entry panel calls during the conversation, it is monitored and you can answer it.
See Call waiting.
If you do not answer the call within the ring call time (RCT) and switch 3 is in ON, the
call is attended to via the interface, which requests the PIN code via a special sound.
If the PIN code is correct the interface will go to remote connection status, but if it is
incorrect, the interface will cancel communication
options in Remote
 Communication with the entry panel.
This is the status corresponding to communication between the entry panel and the
interior telephone. During this status audio is established in full-duplex (default), but you
can change it to a different mode (half-duplex or simplex). The different audio modes
are as follows:
- Full Duplex (FD): The upload audio channels (panel to telephone ) and download audio
(telephone to panel) are open simultaneously.
- Half Duplex (HD): The input and output audio channels are open, but only once each,
changing automatically from one function to another relative to the audio level. The
download channel has priority.
- Simplex (S): Only one audio channel is active each time. The switch is done manually
by pressing the 0 key. The download channel is open by default.
You can also adjust the audio level for the upload channel. See the Quick guide for the
options available during the Conversation (status: communication with the entry
panel).
If in communication with the panel you receive an external call, you will hear a special
tone on the interior telephone (two repeated short tones every 5 seconds). The user can
leave the current conversation on hold and attend to the external line and then resume
the conversation with the entry panel. See Call waiting.
See the Quick Guide for the available options during the Conversation (status:

communication with the entry panel)

 Connection with the entry panel.
You can connect from one of the interior telephones to one of the exterior panels without
requiring a previous call, simply by pressing two keys (* N).
Key Option
* 1 Communication with panel 1 (VDS) or default panel (4+N)
* 2 Communication with panel 2 (VDS)
This function is useful when a previous conversation has expired and the user wants
to recuperate it, or simply to open the door. Once connected, the available options are
described in the Quick guide: The options available during the Conversation (status:
communication with the entry panel).
mode.
.
In the Quick guide see the available
Page 19