Fermax 4545 Manual De Instalador Y Usuario página 49

TELEPHONE INTERFACE
o The options available during the Conversation (status: communication with the entry
panel):
Key Option
5 Activation of the door open relay during the door open time (DOT)
7 Auxiliary Relay Activation during the auxiliary relay time (ART)
8 Auxiliary Relay Deactivation
1** Half-Duplex Mode. See note***
2** Full-Duplex Mode. See note***
0** Simplex Mode
0 Channel switch
See note***
3 Increase Upload Audio (one step). See note*
6 Decrease Upload Audio (one step). See note*
4 Call waiting. Resume the conversation. See note****
* Start conversation. See note**
# End of conversation. See note**
Notes:
- * This setting is not stored.
- ** These keys are used exclusively during a forward or in MCM mode if the interface can
not detect the answering/hanging-up of the telephone. Upon receiving the call if you hear:
beep beep beep, press * to answer and # to end (hang-up) the conversation.
- *** The last mode selected duplex / simplex is stored for the following communications
(different from the CONVERSATION status with the panel). We recommend using the
Half-Duplex mode for forwarding since it allows for a greater volume both of the input and
output without it coupling.
- **** If the entry panel stays in standby, when receiving an external call and it hangs up
before recuperating the connection with the entry panel, it can not be recuperated since the
system returns to standby.
The available options for the user via the Programming menu are as follows:
o
Forward activation. Steps (from the programming menu):
1. Accessing Programming mode: pick up the telephone and before 3 seconds pass, press
# # #, confi rming access to programming mode via a confi rmation tone: beep-beep-beep.
(If already in this mode this step is not necessary).
2. Press the 7 key, you hear a beep.
3. Press the # key, you hear a beep, return to the confi guration menu.
Sequence completed: # # # (beep-beep-beep) 7 (beep) # (beep)
Forward deactivation Steps (from the programming menu):
1. Accessing Programming mode: pick up the telephone and before 3 seconds pass, press
# # #, confi rming access to programming mode via a confi rmation tone: beep-beep-beep.
(If already in this mode this step is not necessary).
2. Press the 8 key, you hear a beep.
3. Press the # key, you hear a beep, return to the confi guration menu.
Sequence completed: # # # (beep-beep-beep) 8 (beep) # (beep)
Remote connection see page 21.
o
Page 17