Standard Equipment; Optional Accessories - Oleo-Mac PW 250 HC Manual De Instrucciones

Tabla de contenido

Idiomas disponibles

If it trips, follow the instructions below:

- turn the main switch (1) to "0" and take the plug out of the mains socket;

- press the cleaner gun lever (23) to discharge any remaining pressure;

- wait 10 to 15 minutes for the high pressure cleaner to cool down;

- check that the requirements for the mains power connections have been followed correctly (see the

INSTRUCTIONS MANUAL – SAFETY INSTRUCTIONS), paying particular attention to the extension lead

used;

- reconnect the plug and repeat the start-up procedure described in "OPERATION".

• Safety valve.

This duly calibrated maximum pressure valve discharges any excess pressure should an anomaly develop

in the pressure adjustment system.

• Boiler safety device.

This stops the burner working should the hydraulic circuit overheat as a result of an anomaly in the

temperature adjustment system.

• Pressure control/ adjustment valve

This valve, calibrated by the Manufacturer, permits to adjust the operating pressure (job pertaining to the

Specialized Technician) and the pumped fluid to return to the pump's suction unit, avoiding dangerous

pressure levels, when the gun is closed or when a pressure value is set over the maximum level allowed.

• Gun Lever Blocking Device.

This safety device (24) allows to lock the lever (23) on the cleaner gun (18) in the closed position, preventing

accidental activation (Fig. 5, position C).

Check the following parts are included in the packaging of the purchased product:

• high pressure cleaner;

• high pressure delivery hose with the quick fit connector;

• cleaner gun;

• lance pipe;

• suction unit connections kit;

• water inlet filter;

• Foam lance;

• instructions manual - safety notifications;

• instructions manual - operation and maintenance;

• the declaration of conformity;

• the warranty certificate;

• booklet with details of service centers;

• nozzle cleaning pin.

If you encounter any difficulties, please get in touch with your dealer or an authorized customer service centre.

The following range of accessories can be added to the standard equipment supplied with the high

pressure cleaner:

• hose reel;

• cleaner gun with pressure regulator;

• ion acceleration limescale remover;

• sandblasting lance: designed for sanding surfaces, removing rust, paint and lime scale deposits, etc;

• pipe flushing probe: designed for unblocking pipes and ducts;

• rotating nozzle lance: designed for the removal of stubborn dirt;

• various types of lances and nozzles;

• back-flow preventer: designed to comply with the standards relative to connecting to the drinking water

mains;

• rotating brush: conceived for delicately and effectively cleaning large surfaces such as the bodywork of

vehicles.