Idiomas disponibles
Idiomas disponibles
3. Once the winder has been sufficiently fastened you can connect the power plug to a
power outlet and attach the tool to the cable.
4. Make sure that the rotating coupling can turn freely with the winder.
V. Operation
1. Check the winder if it functions properly by slowly pulling the cable out. Clicking sounds
indicate the catch positions. Never pull it out beyond the marking!
2. When the cable should be wound up again tug on the cable again and the catch
mechanism will release.
3. The cable winds up automatically then. Be sure to hold on to the loose end!
4. During the wind-up phase make sure that the cable is fed into the winder evenly and
that there is no cable build-up on the side.
VI. Maintenance and inspection
-
– 7 –
