SEVERIN KA 4160 Instrucciones De Uso página 10

Ocultar thumbs Ver también para KA 4160:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 20
clockwise about half a turn so that the
arrow on the lid is aligned with the pouring
spout.
Th e interior of the heat-retaining carafe
insert consists of high quality double-
walled glass with a vacuum in-between for
better insulation. Any streaks or bubble
marks inside the carafe looking like bubbles
or scratches do not aff ect its functional use
nor its heat-retaining ability.
In case the glass is damaged for one or the
other reason as mentioned below, there is a
risk that the glass carafe implodes. Th is might
happen quite some time aft er the glass carafe
has actually been damaged.
Th erefore do not drink out of the carafe
and do not put your hand into it. Always
close the carafe with its screw cap. Do not
leave the vacuum carafe unattended near
where children may reach it.
To prevent damage to the glass carafe:
Avoid shocks and great diff erences in
temperature.
Do not stir in the carafe, for example with
a metal spoon.
Do not use hard brushes or abrasive
cleaning agents.
Do not wipe the inside with a cloth. Dust
particles may cut the glass (similar to a
glass-cutter).
Do not wash in a dishwasher.
Do not use in a microwave oven.
Descaling
Depending on the water quality (lime
content) in your area as well as the
frequency of use, all thermal household
appliances using hot water need descaling
(i.e. removal of lime deposits) on a regular
basis to warrant proper functioning. Any
warranty claim will be null and void if
the appliance malfunctions because of
insuffi cient descaling.
A lengthening of the brewing time and
increased noise during brewing indicate
that descaling of the coff ee maker has
become necessary.
If the appliance switches off as a result of a
lime deposit build-up, some residual water
remains in the container. Caution: Allow
it to cool down fi rst before switching on
again with the start button. Th e coff ee
maker must be descaled immediately once
operation is fi nished.
An excessive build-up of lime deposits
is very diffi cult to remove, even when
strong descaling agents are used. It may
also cause the brewing system to leak. We
therefore strongly recommend descaling
the appliance aft er each thirty to forty
brewing cycles. For descaling, a vinegar
solution may be used as follows:
Mix 2-3 tablespoons of vinegar with the
indicated maximum amount of cold
water.
Pour the descaling solution into the water
container, insert a paper fi lter into the
fi lter holder without adding any ground
coff ee as described in section Making
coff ee, and let the appliance run through
one fi ltration cycle. Repeat the procedure
if necessary. During descaling, ensure
suffi cient ventilation and do not inhale
any vinegar vapours.
To clean the appliance aft er descaling, let
it run through 2-3 fi ltration cycles using
clean water only.
Do not pour descalers down enamel
sinks.
Cleaning and care
Before cleaning the appliance, ensure it is
disconnected from the power supply and
has cooled down completely.
To avoid the risk of electric shock do not
immerse the coff ee maker in water. Th e
appliance may be cleaned with a slightly
damp cloth, using a mild detergent. Wipe
dry aft erwards.
Do not use abrasives or harsh cleaning
solutions.
To remove the used ground coff ee, open
the swing-out fi lter and lift out the fi lter
insert. Dispose of the ground coff ee (as a
10
Tabla de contenido
loading

Tabla de contenido