Castellari Olivance Serie Manual De Uso página 43

4.2. bis Reassembling the combs EP-S L/C V2
Castellari S.r.l.
OLIVANCE EP - EP S
Picture 3
Align the holes of the bearings of the
upper fingers (4) with the holes indicated
in the guard as 1 and insert the screw (9)
with the washer (10); insert the washer
(11) and the nut (12) on the screw on the
opposite side.
Similarly, Align the holes of the bearings
of the lower fingers (6) with the holes
indicated in the guard as 2 and repeat the
fastening operations with the screw, the
washers and the nut.
Reinstall the safety covers and tighten
both screws.
Picture 1
Unscrew the screws (1)
and pull the safety cups (2).
Picture 2
Insert the link rod (3) into the housing
of the upper fingers (4), align the holes
and insert the connecting link (5).
Place the pull hole of the lower fingers
(6) on the free pin of the connecting
link (5).
Close the connecting link with the
plate (7) and secure the clip (8).
N.B. Carefully grease all the assembly
holes.
Picture 3
• Via Lasie 16/E • IMOLA (BO)
43
43