OperatinG instructiOns
Please read the instructions carefully. Before first use,
clean your SODAsiphon according to the instructions
below.
Picture 1
Fill the SODAsiphon with very cold water,
after inserting 1 measurement pipe is
tightly placed in the bottle.
Picture 2
Place the riser with K702 gasket through
the measuring pipe in the bottle. Make
sure that the gasket sits properly on the
riser.
Picture 3
Screw the siphon head on firmly on the
bottle until you cannot see the thread of
the bottle anymore.
Picture 4
Insert on gold-coloured soda charger
(CO
guaranteed quality, only use original
Kayser soda chargers.
Picture 5
Screw the charger into the charger holder
into the siphon head until you hear the
gas flowing in. Shake the SODAsiphon
firmly and then place it in the refrigerator.
(NOT in the freezer!) For the best results:
The colder the water and the longer it is
kept in the refrigerator the more bubbly
the soda water.
Picture 6
To enjoy the soda water, gently press the
lever. Direct the jet to the inner wall of
the glass.
Picture 7
Each time before screwing off the siphon
head, press the lever until no more water
or gas comes out.
Each Kayser SODAsiphon is carefully checked at our
factory before shipment. The Kayser SODAsiphons
are guaranteed for one year from the date of purchase
provided the SODAsiphon is used and operated as
determined. Please read the operating and safety
instructions carefully before use!
cleaninG
Before opening the SODAsiphon operate the nozzle
untilno more gas or water comes out. To thoroughly
clean the SODAsiphon remove the measuring pipe
from the bottle using the K692 (measuring pipe key).
Rinse all the parts with water and place the measuring
pipe back in immediately! For normal, proper use
with pure water, it is not necessary to clean the
SODAsiphon often. The bottle has an easy care
inner coating, do not use any sharp objects when
cleaning. Never boil, never use aluminium corroding
detergents, DO NOT clean in the dish washer. Always
store the clean SODAsiphon open!
Repairs must never be carried out by yourself. For
replacement use only original Kayser parts. Kayser
steel chargers are made of recyclable steel and are
used as valuable raw material in waste separation
facilities. For repairs please always send in head and
bottle together.
) in the K799 charger holder. For
2