Brandt B1610HD LED Manual De Instrucciones página 19

10.Timeshift function
1.Prepare to record the program
This TV allows you to pause and record the
currently watched digital program to a USB
storage device, and to resume to the point
where it was paused.
NOTE:
Formatting a USB 2.0 storage device will
be needed. Save your original data
before formatting. All the data stored in
the USB device will be erased after
formatting.
Sleep timer will be suspended if it had
been set before activating the Time Shift
function.
USB Drive Storage Format
Select to format the USB device and
allocate the amount of space for the Time
Shift function.
NOTE:
The format process will take at least 2
minutes. Please do not turn off the power
or remove the USB device during
formatting.
During formatting, a speed test will be
done on the USB device. If it fails, it
means the USB device may not support
the Time Shift function.
Record a paused DTV program to
USB storage device
1. While in the DTV input source, insert USB
storage device to the USB port on the side
of your TV.
2. Press PAUSE " "to start Time Shift
function. The TV program paused. The Time
Shift OSD appears, and starts recording.
3. Press to PLAY to commence playback
from where programme was paused.
4.Press Stop to stop timeshift function.
FREEZE
s
Play FB FF
NOTE:
Please do not unplug the USB storage
device when the Time Shift function is
activated.
Approximately 4GB of memory buffers
about offer 140 minutes.
When start the Time Shift function,Press
Play ▶again,it will start A-B repeat
function.
You can press stop
-18-
OPERATION
00:00:33/00:04:22
Prev. Next Stop
Pause
key to stop it.
GB