Spengler EFFItens AMI Manual De Instrucciones página 17

The blood pressure monitor is intended for use in the electro-
magnetic environment specified below. The customer or the
user of the blood pressure monitor should assure that it is
used in such an environment.
Immunity IEC
Test 60601
test level
Electrostatic ±6 kV
discharge contact
(ESD) IEC
61000-4-2 ±8 kV air
Electrical fast ±2 kV for
transient/b power
urst supply
IEC 61000- lines
4-4
Surge ±1 kV
IEC 61000- line(s) to
4-5 line(s)
Voltage dip, <5 % U
short (>95 %
interruptions dip in U
and voltage for 0.5
variations cycle
on power
supply
40 % U
input lines
(60 % dip
IEC 61000-
in U
4-11
cycles
70 % U
(30 % dip
in U
25 cycles
<5 % U
(>95 %
dip in U
for 5 s
electromagnetic Immunity
Compliance
level
±6 kV
contact
±8 kV air
±2kV for
power
supply
lines
±1 kV line(s)
to line(s)
<5 % U
T
(>95
T
) in U
T T
cycle
40 % U
T
(60 % dip
) for 5 in U
T T
5 cycles
70 % U
T
(30 % dip in
) for U ) for T
T
25 cycles
<5 % U
T
(>95 % dip
) in U
T T
for 5 s
Electromagnetic
Environment -
Guidance
Floors should be
wood, concrete or
ceramic tile. If floors
are covered with
synthetic material,
the relative humidity
should be at least
30%.
Mains power quality
should be that of a
typical commercial
or hospital
EFFItens AMI
environment.
Mains power quality
should be that of a
typical commercial
or hospital
environment.
Mains power quality
% dip should be that of a
) for 0.5 typical commercial
or hospital environ-
ment. If the user of
the blood pressure
monitor requires
T
continued
operation during
) for
power mains
interruptions, it is
recommended that
T
the blood pressure
monitor be powered
from an uninterrup-
tible power supply
or a battery.
T
)
EN
FR
ES
IT
DE
NL
AR
I 15
®