Cleaning Pattern And Cleaning Mode Selection - ECOVACS ROBOTICS DEEBOT M88 Manual De Instrucciones

3. Operating and Programming

3.3 Cleaning Pattern and Cleaning Mode Selection

DEEBOT has 2 Cleaning Patterns and several Cleaning Modes to choose from to effectively clean
different floors. Cleaning Patterns and Cleaning Modes are selected using the Remote Control or
the ECOVACS App.
Set Cleaning Pattern
Set the cleaning pattern based on floor type.
Random Cleaning Pattern
Random Cleaning Pattern should be set when
cleaning carpet. In Random Pattern, DEEBOT
cleans in a straight line and changes directions
when it meets an obstacle.
When Programmed Cleaning Pattern is Set:
* DEEBOT automatically conducts route planning when cleaning. If the robot is paused, moved
manually or directed by the Remote Control during cleaning, DEEBOT will reconfigure the route
and restart. Therefore, avoid using the Remote Control or moving DEEBOT manually when it is
cleaning to ensure efficiency.
* DEEBOT may pause temporarily to recalculate its cleaning path. This is normal. Please be patient,
the frequency and duration of the pause is determined by room complexity.
* If the cleaning environment contains both bare floors and carpet, barriers (for example a closed
door) should be set between different floor types and cleaning patterns should be set accordingly.
If both floor types are to be cleaned in one cleaning cycle, Random Cleaning Pattern should be set.
12
EN
Programmed Cleaning Pattern (Default pattern)
Programmed Cleaning Pattern is the robot's
default pattern and should be set when cleaning
bare floors. In Programmed Cleaning Pattern
the robot plans the most efficient route, cleans
in a back and forth straight-line pattern, returns
to clean missed spots, then cleans room edges
before completing the cleaning cycle.