ECOVACS ROBOTICS DEEBOT M88 Manual De Instrucciones página 12

3. Operating and Programming
Install Side Brushes
2
Attach Side Brushes to the bottom of DEEBOT
by pressing a brush into each slot with the
matching color until it clicks.
Power ON
3
Turn the robot's Bottom Power Switch to the
ON position. "I"=power ON; "O"=power OFF.
DEEBOT is powered ON when the AUTO Mode
Button glows a continuous BLUE.
* When DEEBOT is not cleaning, it is suggested to keep it powered ON and charging instead of
powered OFF.
4
Charge DEEBOT
Place DEEBOT on the Charging Dock
making sure the Charging Contacts on
DEEBOT and the Charging Dock Pins make
a connection.
Charge DEEBOT for at least 4 hours before
the first use.
* Make sure to turn the robot's Bottom Power Switch to the ON position before charging. ("I"=power
ON; "O"=power OFF. The robot's default setting is "O".) DEEBOT is powered ON when the AUTO
Mode Button glows a continuous BLUE.
* AUTO Mode Button blinks when DEEBOT is charging. AUTO Mode Button stops glowing when
DEEBOT is fully charged.
* Remove the Water Reservoir before charging DEEBOT.
10
EN
ON