Instructions For Use - Nilfisk Power Instrucciones De Manejo

Power
EN

Instructions for use

DE
Before using the machine make sure
that the voltage shown on the rating
FR
plate corresponds with the mains
voltage.
ES
The machine is supplied with dustbag,
prefilter and exhaust filter.
PT
Start and stop
IT
Start
NL
Pull out the cord and plug the
machine into a wall socket. Start the
SV
vacuum cleaner using the start/stop
button on top of the vacuum cleaner.
NO
Stop
DA
Turn off the machine using the start/
stop button. Unplug by grasping the
plug, not by pulling on the cord.
FI
6
A
Connecting hose, tube and nozzles
1. Insert the hose connector into the
suction inlet and press until the
hose engages with a click.
2. Connect the bent tube to the tube
and turn it until they engage with a
click.
3. Connect the tube and nozzle and
twist until they engage with a click.
4. The tube is telescopic and can be
adjusted to your height.
Push the button in the middle
of the tube to release the length
adjustment lock. Adjust the tube to
desired length.
Disconnect hose, tube and nozzle
• Disengage the nozzle from the
tube by pressing the button.
• Disengage the hose from the
tube by pressing the button.
• Release the hose connection
from the suction inlet by pressing
the locking mechanism and
remove.