Applicable Types Of Enclosure / Standards - ProMinent DULCOMETER D1C Instrucciones De Servicio

7

Applicable Types of Enclosure / Standards

7.1 Electric shock and moisture protection (IP)
D1C D: Device in installed condition: Type of enclosure EN 60529 - IP 54
D1C W: Device in sealed housing type of enclosure IP 65 in accordance with EN 60529
outer seal (control panel installation): type of enclosure IP 54 in accordance with EN 60529
7.2 Electrical safety/interference suppression
EC low voltage guideline (73/23/EEC) consequently 93/68/EEC
EC EMC guideline (2004/108/EG)
Supply voltage in accordance with DIN IEC 38
DIN EN 60335-1 Household and similar electrical appliances - Safety
DIN EN 61010-1 Safety requirements for electrical equipment for measurement, control and laboratory
use
DIN EN 61000-6-1 Electromagnetic compatibility (EMC) - Part 6-1: Generic standards;
Immunity for residential, commercial and light-industrial environments
DIN EN 61000-6-2 Electromagnetic compatibility (EMC) - Part 6-2: Generic standards -
Immunity for industrial environments
DIN EN 61000-6-3 Electromagnetic compatibility (EMC) - Part 6-3: Generic standards -
Emission standard for residential, commercial and light-industrial environments
DIN EN 61000-6-4 Electromagnetic compatibility (EMC) - Part 6-4: Generic standards;
Emission standard for industrial environments
DIN EN 61326-1 Electrical equipment for measurement, control and laboratory use -
EMC requirements - Part 1: General requirements
7.3 Test in moist changeable climate
D1C D: Permissible relative humidity: max. 80 % (condensation not permitted)
WARNING
The device is not suitable for use in a moist changeable climate as there is no sealed
housing and constant exchange of air!
D1C W: Moist changeable climate in accordance with FW DIN 50016.
36